MYERS MEOSP50 Series Submersible Effluent Pumps Cast Iron or Bronze

Overview
Reviews

Product Description

MYERS MEOSP50 Series Submersible Effluent Pumps Cast Iron or Bronze

The Myers MEOSP50 submersible pump is specifically
designed to meet the demands of residential sump,
elevator pit, septic tank effluent, industrial circulator
and transfer tank applications.
The 1-1/2 inch NPT dis charge pump is available with a
powerful 1/2 horsepower motor, in both automatic and
manual configurations, and can handle ca paci ties up to
60 gallons per minute and heads to 25 feet.
The MEOSP50 features a heavy-duty cast iron
construction that provides durability in rugged
applications, as well as assisting in dissipating heat
from the motor, for cooler operation. The pump’s
impeller, which is threaded to a stainless steel shaft,
provides long life even in demanding applications, and is
capable of handling up to 5/8 inch spherical solids and
lint.
The MEOSP50’s oil-filled motor provides superior
cooling char ac ter istics, allowing the motor to run cool
and quiet for years. This oil-filled design also provides
permanent lubrication of the shaft bearings, minimizing
maintenance and extending the service life of the pump.
In addition, to protect against overheating, the motor
windings contain an automatic reset thermal overload.
Automatic models feature the exclusive Myers
diaphragm pressure switch, which provides proven
reliability in installations where a float might hang
up. It also incorporates a unique “piggyback” plug
arrangement, which allows for simple conversion to
manual operation by simply removing the switch plug
and inserting the motor plug directly into the electrical
outlet. This feature provides an easy way of periodically
cycling the pump to ensure it is operating properly.

The MEOSP50 is a completely submersible pump
for use in basement sump, elevator pit, septic tank
effluent, industrial circulator, and transfer tank
applications.
Automatic models feature the exclusive Myers
diaphragm pressure switch with “piggyback” plug-in
arrangement, which provides proven reliability in
installations where a float might hang up. Switch is
easily serviced and may be easily disconnected to
operate pump manually

A Water-resistant power cord with molded plug is available in 10
or 20 foot lengths, and is easily field serviceable.
B Upper and lower ball bearings support motor shaft, minimizing
the effects of impeller thrust loads. This design results in
minimum friction and perfect alignment of rotor, for longer
service from pump.
C Oil-filled motor provides superior cooling and permanent
lubrication of bearings, minimizing maintenance and extending
service life.
D Powerful 1/2 HP motor runs cool and quiet for long life. Motor
windings contain automatic-reset, thermal overload protection.
E Mechanical shaft seal is carbon- and ceramic-faced for long,
leakproof life.
F Heavy-duty, cast iron construction provides long life in
rugged applications.
G Discharge is 1-1/2 inch NPT.
H The impeller, which is threaded to a stainless steel shaft,
provides long life in corrosive applications, and is capable of
handling up to 5/8 inch spherical solids and lint.
I Bottom-suction design alleviates buildup of debris, providing
optimum pump performance and reduced maintenance.