Product Description
STA-RITE PN Series Corrosion-resistant Shallow well jet pumps 1/2HP - 1HP
The PN Series pumps are corrosion and abrasion-resistant and are ideal for wells with pumping levels of 25' or less.
KEY FEATURES
Quality Construction - Fiberglass-reinforced thermoplastic polypropylene body provides total corrosion resistance and high resistance to abrasion.
Polycarbonate Impeller - Precision-molded for perfect balance and ultra-smooth for highest performance and efficiency.
Precision Molded Diffuser - Polypropylene diffuser allows pump to prime faster, handle more air.
Heavy-duty Ball Bearings - Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth quiet operation.
BODY CONSTRUCTION: Thermoplastic
MAXIMUM CAPACITY: 18 GPM (PNE model)
FLOW at 10' LIFT and 40 PSI: 10.7 GPM (PND model)
MAX LIFT: 25'
MAX SHUT-OFF PRESSURE: 78 PSI (model PND)
MAXIMUM INLET PRESSURE: 22 PSI
PRESSURE SWITCH SETTING: 30 - 50 PSI
SUCTION SIZE: 1-1/4" NPT
DISCHARGE SIZE: 1" NPT
AMP DRAW (full load) - 1 HP: 7.4 amps on 230v / 14.8 amps on 115v
AMP DRAW (full load) - 3/4 HP: 6.2 amps on 230v / 12.4 amps on 115v
AMP DRAW (full load) - 1/2 HP: 4.95 amps on 230v / 9.9 amps on 115v
VOLTAGE: 230V / 115V
RECOMMENDED BREAKER: see owner's manual
LIQUID TEMPERATURE: 140 °F / (60 °C)
